Power Engineering / Smart Grid / Micro Grid
SMART GRIDS” – INTELLIGENT POWER SUPPLY NETWORKS

In the future, new technology will better equip power grids for the demands of tomorrow. More flexible grid management should make the increasing proportion of renewable energy sources compatible with conventional infrastructures associated with power stations. The variety and number of these decentralised power plants require a revision in how we manage power grids – so-called intelligent networks or “smart grids”

View Details »

 

MICRO GRID TRAINER” – CONTROL OF STAND-ALONE NETWORKS

A stand-alone power network is a type of power supply network which is closed and has no active lines coupling it to other parts of the electrical power supply grid. A stand-alone network is markedly smaller than a combined electricity grid and does not usually incorporate high-voltage power lines

View Details »

 

BASICS OF ELECTRICAL POWER ENGINEERING

Multimedia-based and Practice-oriented Introduction to Power EngineeringWith the aid of numerous experiments and animations, the UniTrain-I multimedia course gives the student insight into the latest important issues relating to power engineering..

View Details »

 

POWER GENERATION AND POWER TRANSMISSION

Three-phase synchronous generatorsIn addition to the basic experiments on three-phase synchronous generators, the experiments in this area also cover manually-operated and automatic synchronisation circuits as well as automatic power factor control (cos-phi control) and power control. High-voltage networks are usually operated with voltages in the region of 110 kV to 380 kV, whereby urban areas and large-scale industrial facilities are supplied with 110 kV, and 380 kV is used for long-distance transmission lines. The line simulation system is designed for operation at model voltages between 110 V and 380 V

View Details »

Renewable Energy
EWG 1 WIND POWER PLANT WITH DFIG

This wind trainer is used to investigate the design and operation of modern wind power stations with double-fed induction generators.

View Details »

 

EWG 2 SMALL WIND POWER PLANT TRAINER

Small wind power plants up to approx. 5 kW power are being deployed today for decentralised power supplies. These plants generate DC voltage. The energy can be stored in accumulator batteries using charge controllers.

View Details »

 

EPH 3 PROFESSIONAL PHOTOVOLTAICS TRAINER (PV)

This solar trainer allows the passage of the sun to be simulated realistically. This makes it possible to conduct experiments in the lab in practical fashion without any need for the sun itself.

View Details »

 

EHY 1 ADVANCED FUEL CELL TECHNOLOGY

The generation of electrical energy using fuel cells continues to develop into a significant area with diverse application potential in electrical engineering and automotive technology. The training panel system permits a safe experimenting environment in connection with hydrogen and fuel cells. At the same it permits interesting investigations and is well suited for both practical lab work as well as demonstrations.

View Details »

 

EPH 2 ADVANCED PHOTOVOLTAICS TRAINER (PV)

The solar trainer enables project work to be carried out with industrial components.The solar trainer permits realistic simulation of the progression of the sun. Emulators make it possible to carry out the experiments in the laboratory without the sun.

View Details »

Uni train & Elo Train
UNITRAIN ELECTRICAL FUNDAMENTALS COURSES

View Details »

 

LEARNING MANAGEMENT SOFTWARE – LABSOFT CLASSROOM MANAGER:

View Details »

 

UNITRAIN INDUSTRIAL PROCESS AUTOMATION COURSES

View Details »

 

UNITRAIN MICROCOMPUTER TECHNOLOGY COURSES

View Details »

 

UNITRAIN MEASUREMENT TECHNOLOGY COURSES

View Details »

 

UNITRAIN AUTOMATION TECHNOLOGY COURSES

View Details »

 

UNITRAIN MECHATRONIC COURSES

View Details »

 

UNITRAIN AUTOMOTIVE TECHNOLOGY COURSES

View Details »

 

UNITRAIN POWER ENGINEERING COURSES

View Details »

Automation Industry 4.0

AUTOMATION TECHNOLOGY

Due to the growing importance of process automation the area of automation technology is taking on an ever greater role in industrial operations. This applies both for standard operations in production as well as for vocational training. Today automation technology almost always involves drive technology, closed-loop control and computer engineering. Due to the rapid developments in microcontroller and computer technology, automation has become one of the most innovative and breathtaking of all the areas of electrical engineering and electronics.

View Details »

 

SAFETY TECHNOLOGY

The training systems dealing with the topic of ”Safety Technology“ cover the subject‘s entire spectrum from simple circuits using safety relays to AS-i Safety with a safety monitor through to fail-safe process controls with PROFIsafe. Optical systems such as light curtains or laser scanners can also be easily integrated into these systems. The heart of the model is the protective door with safety position switch on which a wide range of safety applications can be trained..

View Details »

 

SMART FACTORIES

A smart factory is characterised by the communication between products and the machinery which makes them. The product retains information about its own manufacture in machine-readable form, on an RFID chip for example. With the help of this data, the passage of the product through the manufacturing system and the individual steps in its manufacture can be controlled.

View Details »

 

ROBOTICS

Robots play a key role in modern, highly automated and efficient production processes. The experiment sets for robotics technology guide automation or mechatronics engineers of the future step by step from the fundamentals, through handling the equipment and on to programming of robots. It also demonstrates optimised interaction with automated plant.

View Details »

 

MECHATRONICS SUB-SYSTEMS WITH SIEMENS PLC

All IMS sub-systems are composed of several individual IMS components. They can be connected to any programmable logic controller by means of standard connectors. Before IMS sub-systems are connected in larger installations, the requisite knowledge and skills should be learned with the aid of multi-media UniTrain-I courses.

View Details »

 

IMS VIRTUAL

IMS virtual is a PC-based, graphic 3D simulation system, which provides the virtual learning platform for the IMS mechatronic training system. The virtual sub-systems and production plants are depicted with all of their components animated in dynamic scenes of virtual 3D simulation operating in real time. This 3D simulation is programmed like the real models using STEP 7 and controlled via “S7 PLCSIM” software.

View Details »

 

IPA INDUSTRIAL PROCESS AUTOMATION

​​From closed-loop control of individual systems to flexible automation of entire processes, the various courses convey the fundamental, the principles and the properties of components used in automated processing and production plant with the aid of animations and numerous experiments involving authentic equipment. Multiple experiments cover investigation of controlled systems, determination of step responses and optimisation of control loops. Training also covers the use of useful aids such as Bode and Nyquist plots in authentic experiments.

View Details »

 

CIM COMPUTER INTEGRATED MANUFACTURING

CNC programming and machining are key activities for many metalworking companys and demand alot in terms of training. Lucas Nülle is now offering solutions for CNC training to match its IMS range.The CIM training system meets the demands for modern further education and vocational training in the metalworking sector

View Details »

Automotive Hybrid & Ev
CARTRAIN

The CarTrain training system combines authentic vehicle components with an educationally conceived training course. Each CarTrain training system covers one complete topic from the field of automotive technology and help trainees to understand how equipment functions as part of an overall system in a simple way. All the measurement points needed have terminals on the front panel. A built-in storage oscilloscope makes it possible for trainees to carry out measurements on the system directly.

View Details »

 

 

DIAGNOSIS AND MEASURING TOOLS

In order to successfully diagnose faults in motor vehicles, which are becoming more and more complex from year to year, it is not only necessary to have a broad knowledge of automotive technology, you also need the right set of measuring equipment and diagnostic tools not only to make a diagnosis possible at all, but to achieve it with an efficient use of time.

View Details »

 

TRAINING WORKSHOP

A good education needs the best theoretical lab as well as a modern training workshop. To meet your own individual needs, we work together with well respected partners. Simply contact us if you require a custom estimate for the equipping of your workshop.

View Details »

 

ASE L3 TRAINER “LIGHT DUTY HYBRID/ELECTRIC VEHICLE SPECIALIST”

Prepare your students for the ASE L3 test “Light Duty Hybrid/Electric Vehicle Specialist”. All topics related to the New ASE L3 test are now covered by our newest Hybrid/Electric vehicle trainer. We offer a blending of comprehensive curriculum with practical tasks to make sure your students have the competencies and system understanding needed to succeed in this emerging, highly technical market. Allow your students to build confidence by knowing they can safely work on a state of the art real world system performing the procedures needed to work on hybrid/electric vehicles.

View Details »

Lab Systems
COMPLETE SOLUTIONS FOR THE OPTIMAL LABORATORY AND WORKSHOP INFRASTRUCTURE

View Details »

 

SYBAMOBILE

Mobile experiment and demo stands are easily moved and can be used in a variety of ways. They allow all kinds of training systems and teaching resources to be set up in a highly structured manner so that knowledge can be presented clearly and understandably.

View Details »

 

SYBAPOWER – MODULAR POWER SUPPLY SYSTEMS

SybaPower is a highly flexible 19″ equipment system, which can be integrated with any items in the SybaLab lab furniture ranges. Equipment with a wide variety of functions, covering multiple applications and designed for the 19″ panel insert system that is standard across the globe, allow for customised set-ups to be assembled.

View Details »

 

SYBAWORK – WORKPLACE SYSTEMS FOR WORKSHOPS

Solidness and toughness are the characteristics of the work bench workplaces for workshops, schools and businesses.With technology changing apace, the requirements made on the modern work bench have developed, too. Users must be able to configure their workplace with flexibility in order to accomplish their work properly.

View Details »

 

SYBASTORE – STORAGE SYSTEM

SybaStore represents a standard for storage and cabinets that allows high-quality components to be combined in a well thought out and functioning laboratory. The use of high-quality materials ensures that you can enjoy using them for a long time. SybaStore allows for the perfect furnishing for any application.

View Details »